A single-station method for the detection, classification and location of fin whale calls using ocean-bottom seismic stations

TitleA single-station method for the detection, classification and location of fin whale calls using ocean-bottom seismic stations
Publication TypeJournal Article
Year of Publication2015
AuthorsMatias, Luis, and Harris Danielle
JournalJournal of the Acoustical Society of America
Volume138
Pagination504-520
EndNote Rec Number10861
Abstract

Passive seismic monitoring in the oceans uses long-term deployments of Ocean Bottom Seismometers (OBSs). An OBS usually records the three components of ground motion and pressure, typically at 100 Hz. This makes the OBS an ideal tool to investigate fin and blue whales that vocalize at frequencies below 45 Hz. Previous applications of OBS data to locate whale calls have relied on single channel analyses that disregard the information that is conveyed by the horizontal seismic channels. Recently, Harris, Matias, Thomas, Harwood, and Geissler [J. Acoust. Soc. Am. 134, 3522–3535 (2013)] presented a method that used all four channels recorded by one OBS to derive the range and azimuth of fin whale calls. In this work, the detection, classification, and ranging of calls using this four-channel method were further investigated, focusing on methods to increase the accuracy of range estimates to direct path arrivals. Corrections to account for the influences of the sound speed in the water layer and the velocity structure in the top strata of the seabed were considered. The single station method discussed here is best implemented when OBSs have been deployed in deep water on top of seabed strata with low P-wave velocity. These conditions maximize the ability to detect and estimate ranges to fin whale calls.